SAAB WIS ONLINE

Warm start in AUTO mode

Warm start in AUTO mode




During a warm start, cold air must first be blown out through the vents in order for the climate to be experienced as comfortable as soon as possible after starting.

If the calculated temperature at head level is more than 5°C above the temperature set by the driver on the ACC unit display, the warm start function will be activated until the temperature at head level matches the set temperature.

If the cabin temperature is less than 5°C above set temperature, the ACC control module will immediately begin to operate normally.

The warm start function means that air distribution will be in the panel position with 20 A fan current directly following start. If needed, the value increases slowly to 25.5 A.