SAAB WIS ONLINE

Rear quarter light

Rear quarter light

The rear quarter light is fastened to the body with screws and sealed with butyl tape.

To remove


1. Remove the weatherstrip from the C-pillar.


2. Remove the upholstery around the rear quarter light.

3. Remove the nuts that secure the window.


4. Attach a lifting handle to the outside of the window.


5. Get assistance from a co-worker. Press and pull out the side window. Cut the butyl tape sealing the side window with a knife as the window loosens. Be careful not to damage the paintwork or side window plastic embedment. Use safety glasses and work gloves.


To fit


1. Remove the butyl tape from the body. If the old window is to be refitted, the butyl tape on the window must also be removed.

2. Apply new butyl tape to the side window as shown in the illustration. Use butyl tape part nr (45) 30 16 755.


3. Fit the window and tighten the nuts.


Tightening torque: 3 Nm (2.2 lbf ft)

4. Refit the upholstery around the rear quarter light.


5. Refit the weatherstrip on the C-pillar.