(890-2258) Damage to paintwork on sill under rear left door

Symptom: Damage to paintwork on sill under rear left door.

MODIFICATION INSTRUCTION
Bulletin Nbr:	890-2258
Date: ...........	Juni 2000
Market:	Ej US, CA, JP

Damage to paintwork on sill under rear left door

Service campaign 118 03

Cars in stock must be remedied before delivery.

Cars already delivered must be rectified in connection with a scheduled visit to the garage for service or repairs.

Cars affected

Saab 9-3 5D M00 within VIN interval Y2039620 - Y2041103.

Background

The sill under the rear left door has been scratched in production. The scratch is 2 cm long and is located under the third weld screw from the bottom.

Symptom description

Damage to paintwork on sill under rear left door.

Parts required

400 108 569 Cirrus white

400 108 403 Imola red

400 108 635 Black

400 108 668 Ambassador blue

400 108 767 Scarab green

400 108 486 Cayenne red

400 108 460 Midnight blue

400 108 874 Cosmic blue

400 108 429 Silver

400 111 209 Frost grey

400 126 827 Sun green

400 126 801 Morell red

(16) 30 04 736 Standox etching primer

(16) 30 15 815 Cleaner Teroson FL T875

Procedure

Check box A2 on the modification identity plate before proceeding. Continue as follows if the box is not marked.

1.	Remove the left-hand scuff plate, see WIS - Exterior - Adjustment/replacement - Outer scuff plate 5D and Outer scuff plate sports package/Aero 5D.

2.	Thoroughly wipe the damaged area with cleaning agent, Cleaner Teroson FL T875.

3.	If the damage has penetrated down to the ED layer or the metal, Standox etching primer must be applied to the damaged area. Allow the primer to air-dry for 10 minutes.

4.	Apply the base paint to the damaged area and allow it to air-dry for 10 minutes.

5.	Apply clear enamel to metallic base paint. Do not apply clear enamel to solid paints.

6.	Fit the scuff plate, see WIS - Exterior - Adjustment/replacement - Outer scuff plate 5D and Outer scuff plate sports package/Aero 5D. Note The paint does not need to dry before fitting the scuff plate.

Marking the modification identity plate

After carrying out the procedure, box A2 on the modification identity plate must be marked. Mark the box with the number "7" if the procedure was carried out by the importer or with the number "8" if carried out by the dealer.

Warranty/Time information

See separate information.