Camshaft cover, ch no. 12020001-
|
|
Camshaft cover, ch no. 12020001-
|
|
1.
|
Remove engine cover and release the crankcase breather hose from the camshaft cover.
|
|
2.
|
Remove the turbo delivery pipe (2 bolts under the wiring harness).
|
|
3.
|
Remove the front wiring harness channel and cut the securing points on the rear section of the wiring harness.
|
|
4.
|
Remove the wiring harness channel from the cylinder head and disconnect the fuel lines from the camshaft cover.
|
|
5.
|
Remove the fastener for the fuel lines on the engine mounting.
|
|
6.
|
Remove the camshaft cover.
|
|
1.
|
Clean any gasket residue from the sealing surfaces on the camshaft cover.
|
|
2.
|
Fit a new gasket to the camshaft cover.
|
|
3.
|
Apply sealing compound 87 81 841 to the sealing surface, see illustration.
|
|
4.
|
Position the transmission cover on the cylinder head and tighten the bolts.
Tightening torque: 8 Nm (6 lbf ft).
|
|
5.
|
Press the fuel lines back into their fastenings and fit the wiring harness channel on the cylinder head.
|
|
6.
|
Fit the fastener on the engine mounting and refit the front wiring harness channel. Secure the wiring harness.
|
|
7.
|
Refit the turbo delivery pipe.
|
|
8.
|
Connect the crankcase ventilation hose to the camshaft cover.
|
|
9.
|
Refit the engine cover.
|
|
10.
|
Restore the engine bay to its original condition.
|
