SAAB WIS ONLINE

Engine mounting, front left B205L/R

Engine mounting, front left B205L/R

To remove


1. Remove the top engine cover.

2. Place Lifting beam 83 94 850 above the engine and put the hook in the rear lifting eye. Take up the weight of the engine.


3. Lift the car and remove the bottom engine cover. (LH section only on B205L/R).


4. Unscrew the bolts holding the mounting pad to the body and the bolts in the mounting pad and remove it.



To fit


1. Fit the mounting pad to its bracket.

Tightening torque: 39 Nm (29 lbf ft)


2. Lower the car to a suitable working height and raise the engine with the lifting beam. Tighten the mounting pad to the body.

Tightening torque: 73 Nm (54 lbf ft)

3. Fit the engine cover.


4. Lower the car to the floor.

5. Take up the weight of the motor and remove the lifting sling.


6. Fit the top engine cover.