SAAB WIS ONLINE

Glow plug, auxiliary heater

Glow plug, auxiliary heater

To remove



1. Remove the heater, see alternatively .

2. Remove the cover over the blower fan.

Important

Note the fuel pipe rubber leadthrough.


3. Loosen the four bolts on the control module, remove the cover with the air intake and carefully bend out the control module.

4. Remove the connector and remove the control module from the heater.


5. Loosen the nut and cable connections from the glow plug.


6. Move aside the cables.

7. Remove the glow plug.


To fit



1. Fit the glow plug.

2. Connect cabling to the glow plug and tighten the nut.

Important

Check that the isolator on the glow plug cabling is undamaged and that the cable tabs cannot be shorted to ground.


3. Fit connector B2 to the control module.


4. Fit the cover with air intake and control module.


5. Fit the cover.

Important

Note the fuel pipe rubber leadthrough.


6. Fit the heater, see alternatively .