Boost pressure control valve
|
Boost pressure control valve
|
1.
|
Carefully lift up the sealing strip on the bulkhead partition.
|
2.
|
Undo the control valve bracket and put it to one side.
|
3.
|
Unplug the connector and vacuum hose on the control valve.
Important
|
Note the position of the hoses.
|
|
|
4.
|
Remove the boost pressure control valve from the bracket.
|
1.
|
Fit the boost pressure control valve onto the bracket.
Tightening torque 4 Nm (3 lbf ft).
|
2.
|
Plug in the connector and connect the vacuum hoses in their previous positions.
|
3.
|
Fit the control valve bracket to the bulkhead partition.
|
4.
|
Put back the sealing strip.
|