Manifold absolute pressure sensor
|
|
Manifold absolute pressure sensor
|
|
1.
|
Remove the engine cover.
|
|
2.
|
Detach the wiring harness channel from the camshaft cover and the upper part of the intake manifold, and unplug the connectors.
|
|
3.
|
Remove the pressure sensor.
|
|
1.
|
Clean the sealing surfaces and fit the pressure sensor with a new O-ring.
Tightening torque 8 Nm (6 lbf ft).
|
|
2.
|
Put back the wiring harness channel on the camshaft cover and the upper part of the intake manifold, and plug in the connectors.
|
