SAAB WIS ONLINE

Boost pressure control valve, exhaust emission recirculation

Boost pressure control valve, exhaust emission recirculation

To remove



1. Loosen and move aside the power steering fluid reservoir.

2. Slightly loosen the bolts that secure the boost pressure control valve bracket and lift up the bracket.

3. Unplug the connector and disconnect the hoses from the boost pressure control valve.

Important

Note the position of the hoses.


4. Remove the boost pressure control valve, exhaust recirculation from the bracket.


To fit



1. Fit the boost pressure control valve, exhaust recirculation on the bracket.

Tightening torque 4 Nm (3 lbf ft).

2. Plug in the connector and connect the hoses to their positions as they were before removing.

3. Fit the boost pressure control valve bracket.

4. Refit the power steering fluid reservoir.