Bleeding of fuel lines
Bleeding of fuel lines |
|
To speed up bleeding the fuel system when air enters, for example while changing a filter or when the fuel lines on the inlet side have been removed, use the method below.
1. |
Connect
30 31 069 Nipple, bleeding equipment
, to
88 19 096 Bleeding equipment
or equivalent and start the suction equipment.
|
2. |
Remove the end cap and connect the nipple to the service outlet on the fuel pump feed line.
|
3. |
Suck until a constant flow of fuel is seen in the suction line to the brake-bleeding tool.
|
4. |
Remove the bleed nipple from the service outlet while it is still sucking (to avoid fuel spillage and air entering the system.)
|
5. |
Put on the end cap for the service outlet.
|