SAAB WIS ONLINE

Air collector casing

Air collector casing

To remove



1. Undo the hose clip securing the rubber elbow to the mass air flow sensor.

2. Undo the snap fasteners holding the cover in place.

3. Lift off the cover and remove the filter.

4. Undo the bush nuts keeping the air collection box in place.


5. Lift out the air collection box and connection pipe from the resonator.


To fit



1. Position the air collection box and make sure the connection to the resonator pipe is correct.

2. Tighten the bush nuts keeping the air collection box in place.

3. Clean the air collection box (the lower part of the air cleaner).

4. Fit a new filter as illustrated.


5. Position the mass air flow sensor in the rubber elbow on the air collection box cover. Make sure the projecting lugs on the mass air flow sensor fit into the recesses in the elbow.

6. Position the air cleaner cover, press on the snap fasteners and tighten the hose clip.