Control valve, swirl throttle
|
|
Control valve, swirl throttle
|
|
1.
|
Undo the power steering fluid reservoir and put it to one side.
|
|
2.
|
Slightly loosen the screws securing the control valve bracket and lift up the bracket.
|
|
3.
|
Unplug the connector and vacuum hose on the control valve.
|
Important
|
|
Note the position of the hoses.
|
|
|
|
|
4.
|
Remove the control valve from the bracket.
|
|
1.
|
Fit the control valve to the bracket.
Tightening torque 4 Nm (3 lbf ft).
|
|
2.
|
Plug in the connector and attach the vacuum hoses as they were earlier. A=swirl throttle, B=vacuum pump.
|
|
3.
|
Fit the control valve bracket.
|
|
4.
|
Put back the power steering fluid reservoir.
|
