SAAB WIS ONLINE

Engine oil temperature sensor

Engine oil temperature sensor

To remove


1. Remove the lower engine cover.


2. Place a receptacle under the engine, undo the oil plug and drain the engine oil.

3. Unplug the sensor connector.


4. Remove the engine oil temperature sensor.


To fit


1. Fit the engine oil temperature sensor with a new seal.


2. Plug in the sensor connector.

3. Put back the oil plug with a new seal.

Tightening torque 18 Nm (13 lbf ft).


4. Fit the lower engine cover.

5. Check the oil level and top up as necessary.