SAAB WIS ONLINE

P1106

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE lamp on. Limp home. Loss of power. Cruise control not working.

P1106


Atmosphere Pressure Sensor Circuit. Plausibility Fault with Manifold Absolute Pressure


Fault symptoms


• CHECK ENGINE lamp on.

• Limp home.

• Loss of power.

• Cruise control not working.


Conditions

The following conditions apply for the DTC in question:


• When the difference between the boost pressure sensor and the atmospheric pressure sensor is greater than 22.5 kPa for more than 3 seconds. Diagnosis takes place at engine speeds below 950 rpm and below 15 mg/combustion.

Fault criteria not fulfilled for P0107, P0108, P1107, P1108, P1634, P1635, P1636 or P1637.


Diagnostic help

For more information, refer to "Read value" boost pressure sensor and atmospheric pressure sensor.


• DTC P0106 is generated simultaneously in the control module. Boost pressure control and EGR are disengaged. Diagnosis for P0107, P0108, P1107 and P1108 is stopped. Boost pressure control is disengaged.

• Default value is 70 kPa. Power supply is the same as for pedal position sensor 2.