Pressure/temperature sensor, charge air

/ 9-3 (9400) / 2001 / 2. Engine / Trionic T7 / Adjustment/replacement / Pressure/temperature sensor, charge air

To remove

1.	Unplug the sensor connector.

2.	Undo the connector.

To fit

1.	Apply petroleum jelly (part no. 30 04 520) or the equivalent sparingly to the sensor O-rings. Fit the sensor.

2.	Spray the connector with Kontakt 61 (part no. 30 04 520). Plug in the connector.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.