SAAB WIS ONLINE

Antenna, fixed (Viggen 3D/5D)

Antenna, fixed (Viggen 3D/5D)

To remove



1. Fold down the rear seat backrest.

2. Remove the loudspeaker grilles from the left and right-hand sides of the parcel shelf.

3. Remove the C pillar trim on left and right-hand sides.


4. Remove the rear left and right-hand courtesy handles.

5. Remove the two plastic clips and lower the headlining. Exercise care when handling the headlining as it can easily break.


6. Unplug the cables that are connected to the antenna.

7. Undo the nut by the antenna base and lift out the antenna from the inside.


To fit



1. Fit the antenna from inside and secure with the nut.

2. Connect the cables to the antenna.


3. Lift up the headlining and fasten with the plastic clips.

4. Fit the rear left and right-hand courtesy handles.


5. Fit the trim to the left and right-hand C pillars.

6. Fit the left and right-hand loudspeaker grilles to the parcel shelf.

7. Raise the rear seat backrest.