Antenna rod
Antenna rod |
1. |
Remove the antenna, see
Antenna, electric
.
|
2. |
Undo the screws securing the antenna tube and pull out the tube.
|
3. |
Connect the motor to a 12V battery and wait until the motor has stopped with the antenna extended.
Then, carefully pull out the antenna tube rack from the motor. |
4. |
Push the new rack into the motor with the teeth facing the motor.
Apply a little grease to the rack. |
5. |
Reconnect the motor to the battery at the same time as the rack is carefully pushed in.
|
6. |
Disconnect the battery when the whole rack has been inserted.
|
7. |
Fit the antenna tube.
Make sure the tube is turned the right way. |
To fit |
Fit the antenna, see Antenna, electric .