Brake light switch
| Brake light switch |
| 1. |
Remove the lower part of the dashboard on the driver's side.
|
|
| 2. |
Turn the brake light switch in any direction and then lift it out.
|
|
| 3. |
Unplug the connector.
|
|
| To fit |
| 1. |
Replug the connector.
|
|
| 2. |
Put the switch back in position and turn it in any direction.
|
|
| 3. |
Refit the lower part of the dashboard on the driver's side.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
