SAAB WIS ONLINE

Main instrument display

Main instrument display

To remove



1. Remove upper and lower steering column covers, 3 screws.

Note

Take care when removing the covers. The clips (4 pcs.)at the join may otherwise be damaged.


2. Remove the direction indicator and windscreen wiper switch.

3. Remove the radio.

Note

Make a note of the radio code.


4. Remove the SID unit.

5. Remove all the switches, button blanks and the seat-belt warning lamp.


6. Remove the instrument plate, 9 screws.

7. Tilt the instrument plate towards the compartment.

8. Remove the four screws securing the main instrument unit.


9. Unplug the connectors on the back of the main instrument unit.

10. Lift out the main instrument unit.


To fit



1. Put the main instrument unit into position.

2. Plug in the connectors on the back of the main instrument unit.

3. Screw in the four screws securing the main instrument unit.

4. Fit the instrument plate, 9 screws.


Note

Be careful not to bend the instrument plate when fitting it.


5. Fit the switches, button blanks and the seat-belt warning lamp.

6. Fit the SID unit.


7. Fit the radio.

8. Plug in the direction indicator and windscreen wiper connectors and fit the stalk switches.

9. Fit the upper and lower steering column covers.

Note

Set the clock in SID.


10. Spare part programming must be carried out after changing the main instrument unit. Follow the instructions given in the diagnostic tool menu "Programming".