Bonnet switch
| Bonnet switch |
| General |
The bonnet switch is located on the rear left of the engine bay and acts as a sensor for the bonnet. The switch is connected to pin 41 on the TWICE control module.
| Function |
A pulse width-modulated (approx. 3.5%) voltage is supplied continuously from the control module via a 1 kohm pull-up in TWICE to the switch. From this voltage, the control module can detect whether the bonnet is opened when the alarm is armed by testing the voltage at the input concerned.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
