Brake pads, rear wheel
Brake pads, rear wheel |
1. |
Raise the car and remove the wheels.
|
2. |
Press the brake piston back using a pair of slip-joint pliers.
|
3. |
Remove the pins and keep the retaining spring.
|
4. |
Remove the brake pads. If they seize, use the removal tool for brake pads. See
89 95 771 Removal tool, brake pad
.
|
5. |
Clean the surfaces where the brake pads are in contact with the brake caliper. Use a soft metal brush. Also check the dust caps.
|
To fit |
1. |
Grease the sliding surfaces on the brake pads with copper grease.
|
2. |
Fit the new brake pads in the brake caliper.
|
3. |
Fit the retaining spring and the pins.
|
4. |
Fit the wheel. See
Wheels
.
Tightening torque 110 Nm (81 lbf ft) |
5. |
Lower the car and depress the brake pedal to press out the brake pistons. Adjust the brake fluid level.
|