ACC control module
| ACC control module |
| Removing |
| Important | ||
|
When ACC unit is replaced, the new unit must be programmed, see
|
||
| 1. |
Remove the two outer buttons under the ACC panel.
|
|
| 2. |
Push out the ACC unit from behind.
|
|
| 3. |
Unplug the connector.
|
|
| Fitting |
| 1. |
Plug in the connector.
|
|
| 2. |
Fit the control module.
|
|
| 3. |
Refit both buttons under the ACC panel.
|
|
| 4. |
Calibrate the ACC-system by simultaneously pressing the buttons “AUTO” and “OFF”.
|
||||||||||
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
