Rear seat belt anchor plate, CV
|
|
Rear seat belt anchor plate, CV
|
The plate securing the seat-belt buckle in the rear seat must always be replaced when any of the rear seat-belts has been used in a collision.
|
1.
|
Grind away the welds securing the seat-belt anchor plate.
|
|
2.
|
Grind and smooth off the old welds.
|
|
3.
|
Place the reinforcement over the anchor plate and screw in the bolts a few turns.
|
|
4.
|
Weld the anchor plate in place.
|
|
6.
|
Apply primer to the bare metal surfaces. Use Standox 1K Füllprimer. Apply finishing paint.
|
|
7.
|
Apply Terotex 3000 anti-corrosion agent under the floor.
|
|
8.
|
Fit the seat-belt buckle and reinforcement.
|
