SAAB WIS ONLINE

Windscreen member

Windscreen member


1. Drill out the spot-welds.


2. Grind down the welds securing the windscreen member to the bottom of the A-pillars and cut the windscreen member.


3. Tap loose the windscreen member and align any damaged panels.

4. Grind the surfaces to be welded on the body and spare part.

5. Apply welding primer on the surfaces to be spot-welded. Use Teroson Zinkspray.

6. Fit the spare part and fixate with a couple of welding clamps.

7. Spot-weld the new windscreen member.


8. All-weld the joints between the windscreen member and the lower ends of the A-pillars.


9. Grind the welds.

10. Remove any remaining welding primer. Welding primer reduces adhesion of paint, filler and sealant.

11. Apply primer to all ground surfaces. Use Standox 1K Primer.

12. Seal joints and sheet metal flanges with sealant. Use Terostat 1K-PUR.