Soft top cover
Soft top cover |
Removing |
1. |
Remove the shell from the underside of the soft top cover.
|
2. |
Remove the screws that secure the collision cables to the soft top cover.
|
3. |
Mark the position for the screws securing the soft top cover latches.
|
4. |
Remove the screws and lift away the latches.
|
5. |
Remove the screws securing the access flaps. Loosen the flaps and turn them aside.
|
6. |
Mark the position for the soft top cover retaining nuts.
|
7. |
Remove the soft top cover retaining nuts and lift away the cover.
|
Fitting |
1. |
Fit the soft top cover and tighten the retaining nuts according to the marking.
|
2. |
Fit the access flaps and tighten the screws.
|
3. |
Fit the latches and tighten down according to markings.
|
4. |
Fit the collision cables and tighten the screws. The end sleeves on each respective cable should point at each other.
Tightening torque: 14 Nm (10.3 lbf ft) |
5. |
Refit the shell.
|