Microswitch, fifth bow latch
| Microswitch, fifth bow latch |
There are microswitches at both latches for the fifth bow that sense if the fifth bow is in lock position and ready for locking.
Pin 3 on the left microswitch is connected to control module pin 17 and microswitch pin 2 is connected to grounding point G36.
Pin 3 on the right microswitch is connected to control module pin 32 and microswitch pin 2 is connected to grounding point G36.
When the ignition is turned ON, the control module outputs B+ via a 1 kOhm resistor to the microswitches from pin 17 and 32, and the microswitches close when the fifth bow is locked and the control module inputs are grounded.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
