Replacing remote control keypad
|
Replacing remote control keypad
|
1.
|
Press in the clip in the little hole using the back of a 1 mm drill bit or the like and open the cover.
Tip:
Hold the drill bit with a pliers for sufficient force.
|
3.
|
Remove the circuit card.
Note
|
Be careful not to touch the circuit card with you fingers.
|
|
2.
|
Wipe the circuit card and the back of the keypad with a cotton cloth and fit the circuit card back in the remote control.
|
3.
|
Refit the battery and the cover. When replacing the battery, us a SAAB original battery.
Note
|
After replacing the battery, press the unlock button on the remote control 4-5 times to synchronise the remote control's code with TWICE.
|
|