Outer scuff plate, 5D

/ 9-3 (9400) / 2001 / 8. Body / Exterior / Adjustment/replacement / Outer scuff plate, 5D

Removing

1.	Remove the splash guard.

2.	Remove the sill scuff plate.

3.	Remove the plastic nuts securing the sill scuff plate.

4.	Remove the front sill scuff plate from the weld bolts.

5.	Remove the rear sill scuff plate from the weld bolts.

Fitting

1.	Refit the rear sill scuff plate over the weld bolts.

2.	Guide in the front sill scuff plate by the inside of the wing liner and fit it on the weld screws.

3.	Tighten the plastic nuts.

4.	Refit the sill scuff plate.

5.	Refit the splash guard.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.