Outer sill widener, large 3D Aero/Viggen
|
Outer sill widener, large 3D Aero/Viggen
|
1.
|
Remove the mudguard by unscrewing the three screws and drilling out the plastic rivet.
|
2.
|
Remove the plastic nuts securing the sill scuff plate.
|
3.
|
Remove the sill moulding.
|
4.
|
Remove the sill scuff plate from the weld screws. Pull the sill scuff plate rearwards to loosen it from the guide at the top edge.
|
1.
|
Fit the scuff plate in place by sliding it onto the guides in the top and the weld screw by the rear wheel housing.
|
2.
|
Refit the sill scuff plate.
|
3.
|
Tighten the plastic nuts.
|
4.
|
Refit the splash guard and fit a new plastic rivet.
|