Spoiler, rear 5D/3D
Spoiler, rear 5D/3D |
1. |
Remove the wiper arm and open the tailgate.
|
2. |
Remove the window coverings and trim on the inside of the tailgate.
|
3. |
Remove the wiper motor as follows:
|
3.a. |
Unplug the wiper motor connector
|
3.b. |
Remove the 3 wiper motor retaining screws.
|
3.c. |
Lift out the wiper motor.
|
4. |
Remove the spoiler, collect nuts and washers.
|
5. |
If necessary, remove the zinc tape and clean the tailgate. Affix new zinc tape.
|
6. |
If necessary, remove seals and clean the spoiler. Fit new seals.
|
Fitting |
1. |
Fit the spoiler, 3 nuts with washers.
|
2. |
Fit the wiper motor.
|
3. |
Fit the trim inside the tailgate. Close the tailgate.
|
4. |
Fit the wiper arm.
Check the function. |