SAAB WIS ONLINE

Rear seat belts, CV

Rear seat belts, CV

To remove


1. Remove the rear side trim. See Removing .

2. Remove the bolt securing the seat belt to the floor.

3. Remove the bolt securing the strap guide.


4. Remove the clip securing the upholstery above the long-load opening.

5. Remove the clips securing the upholstery below the long-load opening.


6. Move aside the upholstery and remove the bolt securing the seat belt reel.

7. Remove the seat belt.


To fit



1. Fit the seat belt reel and tighten the bolt.

Tightening torque 45 Nm (33.3 lbf ft)

2. Fit the upholstery in place and press on the clips securing it under the long-load opening. See Fitting .

3. Fasten the clips securing the upholstery above the long-load opening.


4. Fit the strap guide and tighten the bolt.

Tightening torque 45 Nm (33.3 lbf ft)

5. Tighten the bolt securing the seat belt to the floor.

Tightening torque 45 Nm (33.3 lbf ft)