SAAB WIS ONLINE

30 20 971 Screw-thread paste

30 20 971 Screw-thread paste


Specifications

Molykote 1000. 100 gram tube.

Saab application

For lubrication of parts such as the valve guide in the turbo unit.

Packaging

1

Transport

No restrictions apply when transporting this product.

Directives



Product information sheet


1. NAME OF PRODUCT AND COMPANY

Product name

Molykote 1000 Paste

Use

Lubricant

Part no.

MP1000

Manufacturer - supplier

G.A. LINDBERG AB

Box 6044

SE-164 06 KISTA

www.galindberg.se

Tel. +46 8 703 02 00

Fax +46 8 751 40 41



2. COMPOSITION / SUBSTANCE CLASSIFICATION

Ingredients

CAS no.

Contents

FM

FB

FH

R-phrases

Distillates (petroleum), solvent-dewaxed light paraffinic

64742-56-9

<=42

T

45

Distillates (petroleum), solvent-dewaxed heavy paraffinic

64742-65-0

<=42

T

45

Calcium fluoride

7789-75-5

22







Copper

7440-50-8

8







Polybutene

9003-29-6

6









Explanation of codes

FB/FH/FM = Danger code for fire/health/environment (respectively)

T+ = Very toxic

T = Toxic

C = Corrosive

Xn = Harmful

Xi = Irritant

V = Moderately harmful

IK = No marking required

E = Explosive

O = Oxidizing

F+ = Extremely flammable

F = Highly flammable

N = Dangerous for the environment



3. DANGEROUS PROPERTIES

The product has no dangerous properties in accordance with KIFS 1994:12 and its modifications.

4. FIRST AID

Inhalation

No special action.

Skin

Dry the skin with paper towels or the like.

Eyes

Rinse with water.

Consumption

First aid not necessary.

Health check

Normal health check.



5. IN THE EVENT OF FIRE

Suitable extinguishing agents

Water, foam, carbon dioxide and powder.

Fire/explosion risks

Poisonous fumes may develop.

Protective equipment for fire fighters

Mask covering entire face and protective clothing is to be worn.

Other information

Reservoirs near any fire should be moved or cooled with water. Follow emergency routines if the area must be evacuated or isolated.



6. IN THE EVENT OF A SPILL / ACCIDENTAL RELEASE

Personal measures

Use personal protective equipment as described in point 8.

Measures to protect the environment

Do not allow large quantities to run down into drains or water systems.

Sanitation methods

Scrape together, gather and place in lockable container.

Other information

NOTE: If the product is spilled, it makes the surface extremely slippery.



7. HANDLING AND STORAGE

Advice for safe handling

Avoid contact with skin and eyes.

Storage directives

Do not store with oxidants. Store the container well sealed. Store dry. Good ventilation is absolutely necessary. Local exhaust ventilation is recommended.



8. EXPOSURE LIMITATION / PERSONAL PROTECTIVE MEASURES

Technical measures

Ventilation must be efficient. Limit values must not be exceeded and the risk of inhalation of fumes and mist shall be minimised.



Chemical designation

Limit value

Distillates (petroleum), solvent-dewaxed light paraffinic (recommendation)

5 mg/m³

Distillates (petroleum), solvent-dewaxed heavy paraffinic (recommendation)

5 mg/m³

Calcium fluoride (recommendation)

2.5 mg/m³

Copper

1 mg/m³

Polybutene

5 mg/m³



Breathing protection mask

A suitable breathing protection mask should be used if the product is used extensively, in a confined space or if there is a chance that the occupational hygienic limit value will be reached or exceeded.

Eye protection

Protective goggles are to be worn.

Protective gloves

Protective gloves are to be worn if there is a risk or direct contact or splashing.

Other information

Practice good industrial hygiene. Wash your hands after handling, especially before eating, drinking or smoking.



9. PHYSICAL AND CHEMICAL PROPERTIES

Form/condition

paste

Smell

weak

Colour

brown

Solubility



Melting point



Boiling point

Density

1.26 g/cm 3

Flash point

200 °C



10. STABILITY AND REACTIVITY

Stability

Stable under normal conditions.

Reacts with

Can react with strongly oxidizing substances.

Dangerous decomposing products

Silica. Carbon monoxide and traces of incompletely burned carbon products. Toxic fumes from fluorine compounds. Metal products. Nitrous oxides. If this product is heated over 150 °C, small amounts of formaldehyde may be released.

Other information

Formaldehyde fumes that can be released at high temperatures are harmful when inhaled and irritate the eyes and air passages at concentrations under 1 ppm.



11. TOXICOLOGIC INFORMATION

Inhalation

Normally, no harmful effects are expected. Formaldehyde fumes that can be released at temperatures greater than 150 degrees are harmful when inhaled and irritate the eyes and air passages at concentrations under 1 ppm.

Skin

Prolonged, repeated contact can dry out the skin and cause skin damage.

Eyes

Mildly irritating.

Consumption

Small amounts transferred from the hands to the mouth are not harmful. Ingestion of large amounts may produce nausea.



12. ECOTOXICOLOGICAL INFORMATION

Mobility

Fixed material; insoluble in water. No negative effects expected.

Bioaccumulation

No risk of bioaccumulation

Ecotoxicity

No harmful effects to water organisms. No harmful effects to bacteria.



13. WASTE MANAGEMENT

Waste management

Product and packaging waste is handled in accordance with local regulations.



14. TRANSPORT INFORMATION

Road (ADR)

UN no.

Dangerous goods

Marg no.

Class: free

Label

Danger no.

Rail (RID)

UN no.



Class: free

Label

Danger no.

Sea (IMDG)

UN no.

Class: free

Page

Label

Pack. gr:

IATA (air)

UN no.

Class: free

Label

Other transport information

Not dangerous goods according to transport regulations.





15. APPLICABLE REGULATIONS

R-phrases





S-phrases

S-24/25

Avoid skin and eye contact.

S-41

Avoid inhalation of smoke in the event of fire or explosion.

Other information

No ozone-destroying chemicals are in or were used in production.



16. OTHER INFORMATION

Information sources

This product information sheet has been produced in accordance with commission directives 93/112/EEG, 67/548/EEG and 88/379/EEG and relevant modification, legal applications as well as regulations and directives regarding classification, packaging and marking or dangerous substances and preparations.

General data

This information applies only to the above named product and does not necessarily apply if it is used together with one or more products or in another process. To the best of our knowledge, this information is correct, complete and given in good faith, but without guarantee. The user is responsible for insuring that the information is relevant and complete as regards his or her own use of this product.

Replaces

1998-02-10

Issued

2002-01-27