SAAB WIS ONLINE

74 96 268 Thread locking adhesive

74 96 268 Thread locking adhesive


Specifications

Loctite 242. Anaerobic thread adhesive. . 50 ml bottle.

Saab application

For example, manual transmissions and brake calipers.

Packaging

1

Transport

No restrictions apply when transporting this product.

Directives

Repeated or prolonged contact with sensitive or scratched skin may cause allergic reactions. Use Loctite dosage equipment in order to avoid skin and eye contact.

Product data sheet


1. NAME OF PRODUCT AND COMPANY

Product code

0128242

Product name

242 Threadlocker normal

Manufacturer - supplier

Loctite Sweden AB

Box 8823

SE-402 71 Gothenburg

Tel: +46 31 7505400

Fax: +46 31 7505391

Tel (emergency): +353-1-4046444



2. COMPOSITION / SUBSTANCE CLASSIFICATION

Product type

Product based on polyethylenglycol dimethacrylate. Anaerobic thread locking compound.



Ingredients

CAS no.

Conc.

R-phrases

Classification

Benzenamine

613-48-9

0.10 - 0.80

R23/24/25, R33

Hydroperoxide

80-15-9

1.00 - 3.00

R7, R21/22, R23, R34, R48/20/22, R51/53

O, T, N



Code explanation

FB/FH/FM = Danger code for fire/health/environment, respectively

T+ = Very toxic

T = Toxic

C = Corrosive

Xn = Harmful

Xi = Irritant

V = Moderately harmful

IK = No marking required

E = Explosive

O = Oxidising

F+ = Extremely flammable

F = Highly flammable

N = Danger to the environment



3. DANGEROUS PROPERTIES

Irritating to the eyes and respiratory organs. Repeated or prolonged contact with sensitive or scratched skin may cause allergic reactions.

4. FIRST AID

Inhalation

Low volatility. In the event of discomfort, seek out fresh air.

Skin

Wash immediately with soap and water.

Eyes

Rinse immediately with plenty of water for at least 15 minutes.

Consumption

Rinse mouth with water. Drink a great deal of water. Do not induce vomiting.



5. IN THE EVENT OF FIRE

Appropriate extinguishing medium

Non-flammable product. Flash point >100 °C. If the product is exposed to fire, powder, foam or carbon dioxide should be used to extinguish it.

Fire/explosion risks

Traces of toxic gas can build when product is burned.

Protective equipment for fire fighters

Use breathing equipment.



6. IN THE EVENT OF SPILL / ACCIDENTAL RELEASE

Personal measures

Clean with soap and water or a cleaning solution. Ventilate the area.

Sanitation methods

Larger spills are to be confined using sand, dirt or similar material and collected in a closed container for destruction. Smaller spills are to be wiped up with paper towels and deposited in a refuse container.



7. HANDLING AND STORAGE

Tips for safe handling

No special handling requirements. Avoid repeated or prolonged skin contact to limit the risk of allergic reaction. Use in a well ventilated space.

Storage directives

Store in original packaging at 8°C to 21°C. Do not return excess material to original packaging as this could reduce the storage life of the product.



8. EXPOSURE LIMITATION / PERSONAL MEASURES

In the event of repeated or prolonged skin contact, use protective gloves made from polyethylene, natural rubber or a similar ester-resistant material. Use of Loctite dosage equipment recommended.

9. PHYSICAL AND CHEMICAL PROPERTIES

Form/state

Fluid

Smell

Characteristic

Colour

Blue. Non-transparent

pH

Between 3 and 6

Solubility in water

Insoluble

Solubility in acetone

Soluble

Density

1.08 kg/m 3

Flash point (PMCC)

>100 °C

Vapour pressure

<0.1 mm Hg @ 25 °C



10. STABILITY AND REACTIVITY

Stability

Stable under normal conditions.

Does not react with

water or oxidising substances except peroxides.

Other information

Polymerisation may occur after a certain amount of time in an air-free environment and/or in the presence of metal.



11. TOXICOLOGICAL INFORMATION

Inhalation

Irritating to respiratory organs.

Skin

Acute dermal LD50 (rabbits) is estimated at > 2000 mg/kg. Normally not a product that induces an allergic reaction, but repeated or prolonged contact with damaged or sensitive skin could cause an allergic reaction.

Eyes

Irritating to the eyes.

Consumption

Considered to have low toxicity. Acute oral (rats) > 5000 mg/kg.



12. ECOTOXICOLOGICAL INFORMATION

Storage

Stored away from water and sanitation.

Mobility

Fixed material, insoluble in water. No negative effects expected.

Ecotoxicity

The hardened Loctite product is a typical polymer and thus poses no immediate environmental danger. In hardened form, the environmental impact of this product is insignificant in relation to the parts with which it is used.

Miscellaneous information

Biochemical and chemical oxygen demand (BOD and COD) are insignificant for the hardened Loctite product. Care should be taken as regards the environmental impact of the parts with which the product has been used.



13. WASTE MANAGEMENT

Waste management

Used packaging contaminated with this product is to be handled as environmentally dangerous waste and be disposed of in accordance with local and national laws and ordinances. Large quantities of unused product can be disposed of as chemical waster after polymerisation by adding Loctite activator 7638 or 7641. Burn or dispose of following local and national laws and ordinances. This product contributes an insignificant amount of was in relation to the products with which it is used.



14. TRANSPORT INFORMATION

UN no.

None

Air (IATA)

Not applicable

Sea (IMO)

Not applicable

Road/Rail Air (ADR/RID)

Not applicable



15. APPLICABLE REGULATIONS

Contains

Hydroperoxide

Danger class

Irritant



R-phrases

R36/37

Irritating to the eyes and respiratory organs.

S-phrases

S25

Avoid contact with the eyes.

S26

In the event of contact with the eyes, flush immediately with plenty of water and contact a physician.

S51

Provide for good ventilation.



16. MISCELLANEOUS INFORMATION

Successive product data sheet no: 0128242 IE V.7 from 26 April 2000. The Swedish Work Environment Authority directive on hard plastics AFS 1996:4 applies to this product. This product data sheet has been drawn up in accordance with EU directive 98/98/EC and has been revised in accordance with the 25th EU directive 67/548/EEC. Classification and marking in accordance with KIFS 1999:3. Information in this product data sheet has been obtained from reputable sources and is correct to the best of our knowledge at the specified date. Neither Loctite or its subsidiaries assume any responsibility for use of this information or for the use, application or handling of the products specified here. The user should heed the risks associated with improper use of the product.

Product data sheet revised

2000-11-16

For more information

Loctite Corporation, International Health and Regulatory Affairs,Tallaght Business Park,Whitestown, Dublin 24,Ireland.

Tel: +353-1-4510433 or +353-1-4519466.

Fax: +353-1-4510806.

Manufactured by

Dr Prabhu Kulkarni FICI, FIOSH, MBIRA, Senior HRA SpecialistHealth and Regulatory Affairs - Europe.