SAAB WIS ONLINE

Diagnostic trouble codes after road test

Diagnostic trouble codes after road test


(SE, US and CA markets only). Obtain readings of any diagnostic trouble codes in the engine management system that may have been generated during the road test.

Delete diagnostic trouble codes:


Connect the Tech 2 diagnostic tool to the data link connector under the steering wheel.

Turn the ignition switch to the ON position.

Select Diagnostics

Specify the desired model year

Specify the desired vehicle type

Select All

Select Read/Clear all DTCs

Diagnostic Strategy. Press OK

Select Clear all DTC information

Discontinue communication between Tech 2 and the car by pressing Exit

Turn the ignition switch to the OFF position.