Transit support
| Transit support |
Remove the transit supports located under the rubber protector on the shock absorber rod. There are three supports on each side. The tape must first be cut off before the transit support can be removed.
Save the transit supports. They can be used next time the car is to be transported.
| Important | ||
|
After removing the transit supports, the car must not be transported by any kind of carrier. The design of the car body together with the relatively low ground clearance means that the front bumper may be damaged. |
||
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
