Bleeding the fuel lines
| Bleeding the fuel lines |
To speed up bleeding the fuel system when air gets in, for example while changing a filter or when the fuel lines on the inlet side have been removed, use the method described below.
| 1. |
Remove the upper engine cover.
|
|
| 2. |
Remove the end cap and connect the
Nipple
30 31 069 to the service outlet on the fuel pump feed line.
|
|
| 3. |
Suck until a constant flow of fuel is seen in the suction line to
88 19 096 Bleeding equipment
.
|
|
| 4. |
Remove the bleed nipple from the service outlet while it is still sucking (to avoid fuel spillage and air entering the system).
|
|
| 5. |
Put on the end cap for the service outlet. Fit the upper engine cover.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
