SAAB WIS ONLINE

P0106

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE lamp on. Limp home. Loss of power. Cruise control not working.

P0106


Manifold Absolute Pressure Sensor Circuit. Plausibility Fault with Atmosphere Pressure.


Fault symptoms


CHECK ENGINE lamp on.

Limp home.

Loss of power.

Cruise control not working.


Conditions

The following conditions apply for the DTC in question:


When the difference between the boost pressure sensor and the atmospheric pressure sensor is greater than 22.5 kPa for more than 3 seconds. Diagnosis takes place at engine speeds below 950 rpm and below 15 mg/combustion.

Fault criteria for P0107, P0108, P1107, P1108, P1634, P1635, P1636 or P1637 are not fulfilled.


Diagnostic help

For more information, refer to "Read value" boost pressure sensor and atmospheric pressure sensor.


Diagnostic trouble code P1106 is generated simultaneously in the control module. Boost pressure control and EGR control are disengaged. Diagnosis for P0107, P0108, P1107 and P1108 is stopped. Test reading: Absolute pressure sensor= 100 kPa.