SAAB WIS ONLINE

P0403, P0404, P1404

Read the instructions below then start the fault diagnostic procedure.

Symptom: CHECK ENGINE lamp on. Inferior performance. Limp home.

P0403, P0404, P1404


P0403 EGR Valve PWM Signal Circuit. Short to Ground.

P0404 EGR Valve PWM Signal Circuit. Short to B+.

P1404 EGR Valve PWM Signal Circuit. Open Circuit.


Fault symptom


• CHECK ENGINE lamp on.

• Inferior performance.

• Limp home.


Conditions

The following conditions apply for the DTC in question:


• P0403: EGR circuit shorting to ground for more than 0.6 seconds.

• P0404: EGR circuit shorting to B+ for more than 0.6 seconds.

• P1404: Break in EGR circuit for more than 0.6 seconds.


Diagnostic help




• P0403: The diagnostic trouble code indicates an electrical fault in the EGR circuit. The control module uses 50% PWM signal as a substitute value for the EGR valve. The control module uses 2% PWM signal to regulate the boot pressure. The diagnostic tool reading is the same as the substitute value.

• P0404: The diagnostic trouble code indicates an electrical fault in the EGR circuit. The control unit uses 50% PWM signal as a substitute value for EGR. The diagnostic tool reading is the same as the substitute value.

• P1404: The diagnostic trouble code indicates an electrical fault in the EGR circuit. The control unit uses 50% PWM signal as a substitute value for EGR. The diagnostic tool reading is the same as the substitute value.