P1122
Read the instructions below then
start the fault diagnostic procedure.
Symptom: CHECK ENGINE on.
Not possible to control engine speed.
Idling speed set to 1400 rpm.
Pedal Position Sensors not Connected.
Fault symptom
|
•
|
Not possible to control engine speed.
|
|
•
|
Idling speed set to 1400 rpm.
|
Conditions
The following conditions apply for the DTC in question:
|
•
|
Both signals on the pedal position sensor are low for more than 0.3 seconds.
Fault criteria not fulfilled for P1636, P1637, P1638 or P1639.
|
Diagnostic help
The position of the pedal position sensor can be read using the diagnostic tool. The pedal position sensor contact has probably not been connected.
