P1610, P1614
Read the instructions below then
start the fault diagnostic procedure.
Symptom: Engine will not start. Crankshaft does not turn.
CHECK ENGINE lamp on.
P1610
Immobilizer Code not programmed
P1614
Wrong Transponder response from TWICE
Fault symptom
|
•
|
Engine will not start. Crankshaft does not turn.
|
Conditions
The following conditions apply for the DTC in question:
|
•
|
P1610:
Control module in delivery mode. Ignition switch in start position.
|
|
•
|
P1614:
Wrong code exchange between TWICE and PSG16. Ignition switch in starting position.
|
Diagnostic help
P1614:
Can be caused by a defective transponder or no transponder at all.
