SAAB WIS ONLINE

P1638, P1639

Read the instructions below then start the fault diagnostic procedure.

Symptom: The car is in Limp Home; applies to both DTCs

P1638, P1639


P1638 Voltage Supply Group 3. Short to Ground.

P1639 Voltage Supply Group 3. Short to B+.


Fault symptoms


The car is in Limp Home; applies to both DTCs


Conditions

The following conditions apply for this DTC:


P1638 Power supply to accelerator pedal 1 position sensor is short-circuited to ground, output voltage under 4.8 V.

P1639 Power supply to accelerator pedal 1 position sensor is short-circuited to B+, output voltage under 5.2 V.


Diagnostic help

The engine speed has a fixed value of 1400 rpm. The car will not react to the accelerator as long as the fault persists.