Throttle cable (B235R, B205L/R)
| Throttle cable (B235R, B205L/R) |
| 1. |
Remove the cover over the throttle body.
|
|
| 2. |
Remove the protection.
|
|
| 3. |
Detach the throttle cable from the throttle body.
|
|
| 4. |
Twist the cable adjustment clip and withdraw the throttle cable sheathing.
|
|
| 5. |
Remove the lower section of the dashboard and unhook the throttle cable from the accelerator.
|
|
| 6. |
Grasp the plastic sleeve and pull the throttle cable through the bulkhead partition and into the engine bay.
|
|
| To fit |
| 1. |
Attach the throttle cable to the cable mounting.
Fit the clip and twist it into place. |
|
| 2. |
Hook the throttle cable onto the link arm and insert the cable through the bulkhead partition.
|
|
| 3. |
Connect the throttle cable to the accelerator.
|
|
| 4. |
Remove the cable adjustment clip. Adjust the cable's play by holding the throttle cam in the closed position with one hand while pulling the cable taut with the other. Then slacken the cable to the sleeve's nearest notch. Fit the clip.
|
|
| 5. |
Fit the protection.
|
|
| 6. |
Fit the cover back in place over the throttle body.
|
|
| 7. |
Fit the lower section of the dashboard.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
