SAAB WIS ONLINE

Oil delivery pipe, turbocharger

Oil delivery pipe, turbocharger

To remove



1. Disconnect the battery negative cable.

2. Raise the car and remove the bottom engine cover.

3. Position a container under the engine and remove the turbocharger oil delivery pipe from the cylinder block. Lower the car.

4. Remove the turbocharger oil delivery pipe from the turbocharger.


To fit



1. Connect the turbocharger oil delivery pipe using new seals to the turbocharger and the cylinder block. Tighten the connection to the turbocharger.

Tightening torque 12 Nm (9 lbf ft).

2. Raise the car and tighten the oil delivery pipe to the cylinder block.

Tightening torque 20 Nm (15 lbf ft).

3. Refit the bottom engine cover and lower the car.

4. Check the oil level and top up as necessary.

5. Connect the battery cable, adjust the clock in the car and press 5 times on the remote control lock/unlock button.

6. Start the engine and check for leaks.