Switch for interior lighting
| Switch for interior lighting |
| 1. |
Remove the lamp cover from the front roof console.
|
|
| 2. |
Remove the screws holding the roof console.
|
|
| 3. |
Remove the roof console and let it hand on the leads.
|
|
| 4. |
Loosen the switch from its holder.
|
|
| 5. |
Unplug the connector from the switch.
|
|
| To fit |
| 1. |
Replug the connector.
|
|
| 2. |
Fit the switch in its holder.
|
|
| 3. |
Fit the roof console using the 2 screws.
|
|
| 4. |
Fit the lamp cover.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
