B1150
Read the instructions below then start the fault diagnostic procedure.
Symptom: Fog light malfunction.
| B1150 |
Front fog light relay
Fault symptoms
Fog light malfunction.Condition
The control module output is monitored and a DTC generated if there is a:| • |
Open/short circuit to ground.
|
|
| • |
Shorting to battery positive B+.
|
|
DTCs are not generated if the voltage is below 11V or during diagnostic communication.
Diagnostic help
The output from DICE can be activated with the diagnostic tool.DTCs are not generated if the voltage is below 11 V or during diagnostic communication with DICE.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
