Level sensor
Level sensor |
Removal |
1. |
Drain the washer fluid reservoir.
|
2. |
Raise the car and remove the wing liner at the front (3 screws).
|
3. |
Unplug the connector.
|
4. |
Pull away the level sensor to remove it from the washer fluid reservoir.
|
Refitting |
1. |
Press the level sensor into the washer fluid reservoir with the float hanging down.
|
2. |
Plug in the connector.
|
3. |
Refit the wing liner (3 screws).
|
4. |
Lower the car.
|
5. |
Fill with washer fluid
|