Windscreen wiper assembly
|
Windscreen wiper assembly
|
1.
|
Detach the protective cover with a screwdriver and remove the retaining nuts from the wiper arms.
|
2.
|
Remove the wiper arms.
|
3.
|
Disconnect the washer hose leading to the bonnet from the cover on top of the false bulkhead panel.
|
4.
|
Remove the rubber seal from the partition.
|
5.
|
Remove the clips that hold the cover on top of the false bulkhead panel.
|
6.
|
Detach the washer hose from the underside of the cover and remove the cover.
|
7.
|
Remove the cover from the centre spindle and the heating and ventilation unit.
|
8.
|
Detach and disconnect the connector from the bracket.
|
9.
|
Remove the wiper unit (4 screws).
|
10.
|
Lift out the whole windscreen wiper assembly.
|
11.
|
Remove the link arms from the bracket and motor.
|
12.
|
Remove the motor (3 screws).
|
1.
|
Refit the motor (3 screws).
|
2.
|
Refit the link arms on to the bracket and motor.
|
3.
|
Refit the windscreen wiper assembly.
Tightening torque: 8 Nm (6 lbf ft).
|
4.
|
Plug in the connectors.
|
5.
|
Refit the cover on to the centre spindle and the heating and ventilation unit.
|
6.
|
Refit the washer hose and the cover on top of the false bulkhead panel.
|
7.
|
Refit the clips that hold the protective cover in place.
|
8.
|
Refit the rubber seal on to the partition.
|
9.
|
Connect the washer hose from the bonnet to the protective cover on top of the false bulkhead panel.
|
10.
|
Refit the wiper arms and protective covers.
|