"Activate" menu

"Activate" menu

Note
When a system function is activated with the diagnostics tool, the control module executes a command which is not normal from a functional point of view. In activation mode the diagnostics tool checks the control module and the activation command should therefore be used with discrimination. An activated function will always be reset when you leave the activation mode and continue in the diagnostics tool's menu.
Always clear any diagnostic trouble codes that may have been generated in the transmission system or any other system when you have finished your work.

Important
Activating mode can be selected in gear position N only. In other gear positions, the message SHIFT TO N AND PRESS ENTER will be displayed. All the activation commands can be cancelled with Exit.

Activate	Condition Activation	Description	Value
Solenoid 1-2/3-4	Ignition ON	The control module activates the 1-2/3-4 shift solenoid (S1). If in working order the solenoid will click.	ON/OFF
Solenoid 2-3	Ignition ON	The control module activates the 2-3 shift solenoid (S2). If in working order the solenoid will click.	ON/OFF
Solenoid Lock Up	Ignition ON	The control module activates the Lock-up solenoid (SL). If in working order the solenoid will click. A stethoscope should be used.	ON/OFF
Solenoid Pressure Regulation	Ignition ON	The control module activates the pressure control solenoid (ST). The solenoid is activated with 250 mA and 910 mA alternately. The current values are approximate and are presented on the diagnostics tool's display. If in working order the solenoid will click. A stethoscope should be used.	ON/OFF
WINTER Lamp	Ignition ON	Turns the lamp on/off irrespective of the input value to the main instrument unit.	ON/OFF
SPORT Lamp	Ignition ON	Turns the lamp on/off irrespective of the input value to the main instrument unit.	ON/OFF
CHECK GEARBOX Lamp	Ignition ON	Turns the lamp on/off irrespective of the input value to the main instrument unit.	ON/OFF
CHECK ENGINE Lamp	Ignition ON	Turns the lamp on/off irrespective of the input value to the main instrument unit. Applies to cars with OBDII diagnostics only.	ON/OFF