SAAB WIS ONLINE

Delivery pipe RHD

Delivery pipe RHD

To remove


1. Empty the clutch system (brake fluid) through the bleed nipple on the slave cylinder with 88 19 096 Bleeding equipment .


2. Undo the clip securing the deliver pipe to the master cylinder.

3. Detach the delivery pipe from the master cylinder.

4. Unscrew the delivery pipe from the slave cylinder connection.


5. Pull the delivery pipe from the clamp on the side of the engine bay.

6. Remove the pipe.


Fitting



1. Blow clean the pipe and put it in place.

2. Press the delivery pipe into the master cylinder.

3. Connect the delivery pipe to the slave cylinder and tighten the nut. Press back the locking clip. Make sure that the pipe does not come into contact with the gearbox.

Tightening torque 15 Nm (11 lbf ft).

4. Press the pipe into the plastic clip.


5. Top up with brake fluid and bleed the system, see .

6. Make sure all the connections are tight.

7. Test the clutch.