Ignition switch cylinder
Ignition switch cylinder |
1. |
Remove the antenna by turning it slightly clockwise and then pulling straight up.
|
2. |
Turn the ignition switch to the OFF position.
|
3. |
Bend a welding rod.
|
4. |
Press in the catch in the lock cylinder using the welding rod and lift the lock cylinder straight up. The key must be in the lock cylinder.
|
To fit |
1. |
Turn the key to the OFF position.
|
2. |
Position the lock cylinder. Push it fully down and make sure that it is secure.
|
3. |
Fit the antenna.
|